So we recommend mounting transducers directly in the water for best results using a deployment arm like YakAttack makes. https://www.basspro.com/shop/en/scotty-kayak-sup-transducer-arm-mount-for-post-mount-with-gear-head-adapter OR Scotty ...
Hi, Thank you for the message. Unfortunately, not. The hole in the hull for the pedal is not big enough for the head unit to fit plus the trolling motor cannot clamp on anything to keep it in place.
We suggest using a 250 cm or longer paddle . The kayak is pretty wide and the longer your paddle is the more comfortable and efficient it is to use for the blades to reach the water.
The pedal drive system drops into molded grooves and locks into place with two slide mechanisms. It's easy to drop the drive in and lock it and just as easy to remove when beaching.
No the kayak will not take on water when the pedal drive is removed. Some remove the drive when anchored and you definitely have to stow it as you come into shore and when you are launching. You can keep the floor dry by using the tethered scupper ...
The 6" round screw-on deck plate hatch cover can be ordered here and we ship to North America and Internationally. https://boutiqueborealdesign.com/collections/deck-outfitting/products/6-inch-deckplate-seaward It fits the Riot Escape Duo, Duo Deluxe, ...
In these two short videos we walk you through the easy set up and install your pedal drive in the Riot Mako 10 Versa kayak for the first time. If the tracks to hold the drive are not installed we show you how to install these also as your first step. ...
Some smaller customers and paddlers ask us what is the minimum distance that the pedal drive and seat can be set to allow for shorter leg length (and paddlers to reach the pedals) For the Mako 10, 10.5 and 12: Distance is 41'' (104 cm) measured from ...
In this short video we show you how to assemble flip drive pedals and install it into the boat for use. Remove the long side bolt as shown in the video Slide the pedal into place until bolt holes line up Screw the bolt back into place using a wrench ...
In this 9 min video we walk you through the steps of unpacking your Riot Mako 8.5 Air pedal drive fishing kayak for the first time and setting it up for use. Once you've done this a few times it will take you 5-10 min each time you want to assemble ...
We do not recommend using the scupper holes for the carts. The hulls are too heavy for that and may cause damage in the scupper hole areas. A wider heavier duty flat type cart is best with straps to anchor it in place. The scupper type carts can ...
Both drives have their pros and cons so can choose the one you prefer the most. The Impulse Drive has a propeller and can go forward and in reverse also to slow down and back up too. The drive needs to be pulled out once you get in shallow water to ...
We know you are excited to get out on the water with your new pedal kayak. Here are some Getting Started Resources to get you on your way faster: Download the attached Assembling Your Drive, Seat and Rudder For Mako Kayaks (see below) Watch the ...
Installing your Steering Handle is super easy. See the video here. Replacing your Mako Kayak steering handle and with the cables for rudder control is pretty straight forward but does take a bit of time and some tools: You will need: Small multihead ...
There is no problem using a Riot Mako 8.5 Air kayak in saltwater. You can mount and electric motor but would need a bit of work o your end in terms of mounting to the bracket in the back. We currently do not have a video showcasing how to do this ...
Hi, there is no problem using this kayak in saltwater. You can mount and electric motor but would need a bit of work o your end in terms of mounting to the bracket in the back. We currently do not have a video showcasing how to do this unfortunately ...