If you do want to mount it in a hatch in the hull then follow this method. In this video he uses a Jackson kayak to walk through it all, but covers a lot of different hull shapes and designs. That transducer needs to be flat against the hull with no gaps or air pockets. This is a good video.
We know you are excited to get out on the water with your new pedal kayak. Here are some Getting Started Resources to get you on your way faster: Download the attached Assembling Your Drive, Seat and Rudder For Mako Kayaks (see below) Watch the ...
There is no problem using a Riot Mako 8.5 Air kayak in saltwater. You can mount and electric motor but would need a bit of work o your end in terms of mounting to the bracket in the back. We currently do not have a video showcasing how to do this ...
In this 9 min video we walk you through the steps of unpacking your Riot Mako 8.5 Air pedal drive fishing kayak for the first time and setting it up for use. Once you've done this a few times it will take you 5-10 min each time you want to assemble ...
Hi 1) For patching would see article and video here: https://paddlingmag.com/skills/diy-projects/kayak-repair/ Also may be able to just put a patch over this hole with something like Gator Guard. ...
Hi, there is no problem using this kayak in saltwater. You can mount and electric motor but would need a bit of work o your end in terms of mounting to the bracket in the back. We currently do not have a video showcasing how to do this unfortunately ...