Most of the Boreal or Riot kayaks need about 3 meters but you could measure from the dial or slider box to the skeg and then add some extra to the measurement.
Please download the instructions for replacing the skeg rope line on a Riot Kayak below. Please check inside the skeg box to verify that the mount is still present (small box with a spring). If it is, you will only need the possibly the blade (21035) ...
See attached video at the bottom of this page. Start from the mid point of your length of rope and thread rope through the two holes on the rudder blade that are side by side and make sure both of your exiting lines are the same length. So ...
In this quick video we show you the steps to replace your skeg on your Riot Kayak. Skeg replacement kits are available to purchase and ship to you here: https://boutiqueborealdesign.com/search?q=skeg+kit https://youtu.be/lmaqmN_Mhg0 1. Take out the ...
We recommend the following as different options to fix: Rest or lift the stern (rear of kayak) above the ground or water, so the skeg can lower and raise freely. Try to pull firmly on the skeg to get it down all the way, till skeg reaches its full ...
If you are having issues with a leaking valve on your inflatable kayak or SUP, we have good news for you! In majority of cases they can be easily fixed following some or all of these steps. Fully inflate your Mako 8.5 Air or inflatable craft, then ...