How to replace a hatch rim (for a rubber style hatch cover style)

Replacing your hard plastic hatch rim on your kayak is relatively easy.  You will need a multi-head screwdriver, a sharp knife and some good quality silicon. Please see attached instructions on a step by step guide to removing old rim and replacing it with a new one.   You can also watch a video here

• Related Articles

• How do I fix a leaking hatch (and replace the rim with a new seal)?

  1. If the leak in your rim is small then try the following first with some silicon: Tear off the removable glue/silicon of the hatch rim where it is leaking as best you can by hand. Apply one full circle of glue to the hatch rim and screw parts, and ...

• Compartment lid - need replacement hatch cover.

  Hello, Rubber hatches for the Riot Kayaks can purchased here: Large oval hatches (stern and sometimes bow hatch): https://boutiqueborealdesign.com/products/dual-density-hatch-w-bungee S Small round hatches (usually the bow) : ...

• I am having trouble fitting my rubber hatch on my kayak. What do I do?

  Sometimes the rubber hatches are a bit difficult to put on the hatch rim. The fit is tight so that if forms a good seal to prevent water from entering the kayak. The best way is to: Start on one side pushing hatch down and running your hand along the ...

• Looking for hatch covers for my Riot kayak

  Hello, you can find the hatch covers for Riot Kayaks here: Large oval cover: https://boutiqueborealdesign.com/products/dual-density-hatch-w-bungee Small round cover: https://boutiqueborealdesign.com/products/dual-density-hatch-w-bungee-for-brittany ...

• How do I fix a leak in my compartment or hatch?

  The first step to fixing a leak in your compartment/hatch is identifying where the water is entering. The possibilities are: The hatch cover is not forming an adequate seal, perhaps due to improper maintenance (requires regular cleanings to remove ...