How do I replace a foot pedal on a Riot Brittany kayak to make it rudderless?
Please download the following document below for the steps to replace the foot pedal (s) on a Riot Brittany Kayak.
1) Remove the cable from the rudder and the rudder and store.
2) Take out the old footrest by unscrewing both bolts on the side
3) Push out the foot pedal from the slider
4) Untie the bungees
5) Take out the webbing straps
6) Put the trigger (the black clips) into the foot pedal
7) Put the foot pedal back into the slider
8) Screw the sliders back into place.
Related Articles
How to adjust the foot pedals on the Riot Kayaks Polarity 16.5 tandem kayak
In this quick video we show you how to adjust the foot pedals on the Riot Kayaks Polarity 16.5 tandem kayak. 1. Push down on the tab and slide the pedal forward or back 2. Once you reach the desired position, release the tab and the foot pedal will ...Setting Up Your Pedal Kayak
We know you are excited to get out on the water with your new pedal kayak. Here are some Getting Started Resources to get you on your way faster: Download the attached Assembling Your Drive, Seat and Rudder For Mako Kayaks (see below) Watch the ...How do I adjust my kayak foot rests or foot pedals?
Adjustable via a locking rail or webbing system, properly adjusted footbraces increase your kayak stability and control. Certain models of footbraces control the kayak’s rudder. A properly adjusted footbrace should allow your knees and thighs to fit ...Replacing Foot Pedals on Riot Polarity
These are two options for replacing the old pedal system on the Riot Polarity. Using all or part of a kit SM114 Option #1 : we send 2 sets like the next picture, the client needs to take out the sliding piece from the rail (and SS-cable) and install ...I own a Riot whitewater kayak. Is there an owners manual for my kayak?
See link at bottom to view and download the Riot Whitewater Owner's Manual from 2008. Works fairly well for info on current (since we have not changed them much) and older model (discontinued) kayaks.